Rolking Felt · Precision Abrasive Systems · Paramount Grade
A slotted felt lap wheel built for horology, fine jewellery, silverware, golf club heads, turbine blades and precision moulds. The 4-slot split lap design opens a see-through spinning view at speed, so the operator can watch the contact point on the workpiece and stop before the surface is over-polished.
Specified under these search terms
01 / Why this wheel
Every wheel is engineered, trued and balanced on the same principle: give the polisher a predictable face, an honest view of the work, and a felt body that holds compound instead of throwing it away.
Four precisely spaced radial slits turn the spinning face into a stroboscopic window. The operator sees the polishing contact point and the article surface directly, which is the single biggest defence against over-polishing a watch bezel or a plated jewellery surface.
Dense compressed pure wool felt holds diamond paste, rouge and polishing compound in the fibre body rather than slinging it off the rim, so one charge works longer and finishes stay consistent across a batch.
Wool felt is a naturally open, low-conduction structure; combined with the slotted face it breaks contact periodically and lets heat bleed away. Thin silver sections and precious-metal plating stay cooler, reducing burnishing and drag marks.
Each wheel is balanced to run smoothly on the spindle and the centre hole is located dead centre, so the lap runs true at speed without hammer or wobble. Thickness is 1/2″ with beveled edges as standard.
Soft, Medium, Hard, Rock Hard and Flint Hard let one polishing room match the lap to the substrate — from delicate plated watch cases through to hard tool steel and silver flatware that needs to bite.
Diameter, thickness, slot count, slot width, centre-hole form and hardness are all production variables. Send a drawing or a sample and we build the lap wheel to it, under your own brand if required.
02 / Working principle
A split lap is not a solid buff. The face is parted by four radial slots that survive the whole life of the wheel; at working speed those slots become an intermittent viewing channel across the contact zone. This is the mechanic that separates a precision split lap disc from an ordinary felt buffing wheel.
Live view · 4 radial slots · contact point stays visible at speed
03 / Specification
Standard builds are listed below. Any dimension marked adjustable can be produced to your drawing for OEM and ODM programmes.
| Product | 100% Wool Split Lap Buffing Wheel — Paramount Grade, slotted felt lap wheel for precision polishing and lapping |
|---|---|
| Material | 100% pure wool felt, high density, compressed and trued |
| Diameter | 4" (100 mm) · 6" (150 mm) · 7" (180 mm) · custom diameters on request |
| Thickness | 1/2″ (13 mm) standard · adjustable |
| Centre hole | Pin hole for tapered spindle, located precisely at centre · bore size adjustable |
| Slot configuration | 4 radial slots (4-slot split lap) · slot count and slot width adjustable |
| Edge finish | Beveled edges as standard, so the lap does not cut a hard line into the workpiece |
| Hardness grades | Soft · Medium · Hard · Rock Hard · Flint Hard |
| Balance | Individually balanced for smooth high-speed running without wobble |
| Consumables | Compatible with diamond paste, rouge, alumina and general polishing compounds |
| Customisation | Diameter, thickness, hardness, slot geometry, centre hole and private-label packing (OEM / ODM) |
04 / Selection guide
Hardness controls how much the felt face compresses under load: a softer lap follows contours and protects plating, a harder lap stays flat and cuts faster. The bars below indicate relative face rigidity, not performance ranking.
Delicate and contoured work: plated watch cases, thin gold settings, silver holloware details. Conforms to the surface and keeps pressure light.
The general-purpose grade for jewellery, watch bracelets, golf club heads and mixed batches where one lap must cover several shapes.
Flat faces and defined edges: watch case flanks, silver flatware, stainless fittings and pre-polish on mould cavities.
Where the lap must stay absolutely flat and cut aggressively: tool steel, tungsten carbide tooling, hard alloy turbine components.
The densest, most rigid grade. Heavy stock removal and mirror finishing on hard metals, silverware bodies and demanding lapping operations.
05 / Applications
One wheel family, four very different polishing rooms — the common thread is a surface where a visible contact point and controlled heat matter more than raw speed.
Watch cases, bezels, case flanks and bracelet links. The see-through spinning window lets the polisher follow the original case geometry and stop at the exact moment the drag line disappears.
Gold, platinum and sterling silver, plus holloware such as teapots, trays and trophies. Wool felt holds rouge in the body of the lap, giving a deep, even lustre without the risk of cutting through plating.
Turbine blades, vane edges, golf club heads and mirror-finished investment castings. Hard and Rock Hard grades hold a flat face while the operator inspects the edge radius through the slots.
Mould cavities, die faces, punches and gauge blocks, plus knives, chisels, glass, stone, fibre-glass and hard plastics. Flint Hard and Rock Hard laps are used dry or lightly charged for stock removal.
06 / Product & application gallery
Eight reference views covering the finished wheel, the 4-slot geometry, the workshop set-up and the finishing results this split lap delivers.
07 / OEM & ODM
Because every parameter of a felt split lap is a manufacturing variable, we build wheels around your polishing process rather than asking you to fit around ours.
Rolking Felt supplies wholesale and private-label split lap buffing wheels to jewellery workshops, watch service centres, metal finishers and tooling distributors. Send us the drawing, the sample or simply the application — substrate, finish target and spindle type — and we will recommend the diameter, hardness and slot configuration that fits it.
08 / Export packing
Every shipment leaves the workshop packed for long-haul export. Each wheel is bagged on its own so the felt face arrives clean and true, then the bags are stacked in a rigid export master carton rated for container and air freight.
Each 100% wool split lap wheel is sealed in its own polybag before cartoning, so wool fibres, slot edges and bevels are protected from dust, moisture and scuffing in transit.
Bagged wheels are packed in a rigid corrugated master carton. Reference build: 7 inch x 1/2 inch x 1-1/4 inch wheels, 20 pcs per carton. Other diameters and counts are packed to order.
Request a quote or a sample lap — quote your diameter, hardness grade, centre-hole type and quantity, and we will return pricing, lead time and a trial wheel for your own polishing bench.
9 / FAQ
A split lap buffing wheel is a 100% wool felt polishing wheel whose face is parted by radial slots. It is used for precision polishing and lapping of hard, detailed surfaces — watch cases and bezels, fine jewellery, silverware, golf club heads, turbine blades and precision moulds — where the operator needs to control the finish closely instead of simply buffing a large area.
The four radial slots break the solid face of the lap. When the wheel spins, each slot sweeps the contact zone repeatedly, so the face reads as a blinking, see-through window. The polisher can therefore watch the actual contact point between felt and workpiece, see the scratch pattern as it clears, and lift off immediately — which is what prevents over-polishing on plated, engraved or thin sections.
Use Soft or Medium for plated watch cases, hollow jewellery and any contoured or delicate surface, because those grades compress to follow the shape and keep pressure light. Move to Hard or Rock Hard when the lap has to stay flat and cut faster on watch case flanks, silver flatware, stainless fittings or tool steel. Flint Hard is the densest grade, chosen for heavy stock removal and mirror finishing on hard metals such as silverware bodies. Trial wheels are the fastest way to confirm the right grade for your process.
Standard diameters are 4″ (100 mm), 6″ (150 mm) and 7″ (180 mm), with custom diameters produced to order. Thickness is 1/2″ (13 mm) as standard and the standard centre hole is a pin hole sized for a tapered spindle. Thickness, bore size, slot count and slot width can all be adjusted to suit your machine and the work you are polishing.
Yes. We manufacture to drawing or sample: diameter, thickness, hardness grade, slot geometry, centre-hole form and private-label packing are all variable. Share your application details or a reference wheel and we will recommend a specification, then supply pre-production samples for trial polishing before the volume order is produced.
Can’t find your size or grade combination? Send the drawing or a used wheel and we will quote it.